Products
Navigation
Send Us A Message
Silicon-manganese Alloy 6517
Chemical Content TableProduct Packaging
Product Details
Introduction to Silicon Manganese
Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicothermic production of metallic manganese in production.
Introduction to Silicon Manganese 6517
Using silicon manganese alloy for steelmaking, the melting points of the deoxygenated products MnSiO æ and Mn ₂ SiO ₄ are 1270 ° C and 1327 ° C, respectively, which have the advantages of low melting point, large particle size, easy floatation, and good deoxygenation effect.
Specification and particle size: natural lump, 10-100mm, powder or according to customer's requirement.
Packing: one metric tonne in a big bag or according to customer's requirement
The use of silicon manganese 6517
Silicon manganese alloy is an alloy composed of elements such as manganese, silicon, iron, and a small amount of carbon. Silicon manganese alloy is mainly used as an intermediate material for deoxidizer and alloying agent in steel production, and is also the main raw material for the production of medium and low carbon manganese iron. Silicon manganese alloys can also be continuously smelted in large, medium, and small submerged arc furnaces.
Delivery Time
Inventory 2-3 working days New manufacturing 7-10 working days
Mode of Transportation
1. By Air, fast but expensive.
2. By Sea, usual and economy.
3. By Train, suit for middle Asia countries.
4. By Express, suit for small package.
We only provide highest quality goods available, accompanied by after support!
Q1: What international standards do your products and services comply with?
A1: Our products fully comply with international standards such as REACH, MSDS, and COA, and we strictly implement the ISO9001 quality management system. We can also provide third-party testing reports (SGS, BV, etc.) according to customer needs.
Q2: How long does it take for goods to be delivered to my country?
A2: The delivery time depends on the transport mode and destination country. Generally, sea transport takes 15-30 days, air transport takes 3-7 days, and we will optimize the transport route to shorten the delivery time as much as possible.
Can you provide customs clearance services for dangerous chemicals?
A3: Yes. Our team is proficient in the customs clearance procedures for dangerous chemicals in various countries, and can provide professional compliant declaration and customs clearance services to ensure smooth customs clearance.
Q4: Do you provide customized product and service solutions?
A4: Yes. We can provide personalized product customization and export service solutions according to your specific needs (product specifications, application scenarios, procurement volume, etc.).
![Ferrosilicon 75]( "Ferrosilicon 75")
Ferrosilicon 75Ferrosilicon is an iron alloy composed of iron and silicon. Ferrosilicon is an iron silicon alloy made by melting coke, scrap steel, quartz (or silica) as raw materials in an electric furnace. The manufacturer provides four grades of ferrosilicon, 75 # 72 # 70 # 65 #. The price of ferrosilicon is favorable, and the processing granularity includes natural blocks, standard blocks, particles, powders, etc. Can be provided according to customer requirements.Learn More →
![Ferrosilicon 70]( "Ferrosilicon 70")
Ferrosilicon 70Ferro Titanium, an intermediate alloy of titanium and iron, is used as a purifying agent for steel. Production process: Ferro-titanium is an alloy of titanium and iron. The process of producing ferrotitanium usually involves mixing titanium and iron feedstocks and reacting them at high temperatures. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement.Learn More →
![Ferrosilicon 65]( "Ferrosilicon 65")
Ferrosilicon 65Silicon iron 65 has always been one of the metallurgical materials purchased by metallurgical material manufacturers. The price of silicon iron 65 is slightly lower than that of silicon iron 75 72, but the silicon content is much better than that of low silicon iron. The national standard silicon iron content is better, and the effect in the metallurgical process is also more obvious. At the same time, the smelting cost is greatly reduced. Therefore, the national standard silicon iron 65 is very popular among metallurgical manufacturers! Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement.Learn More →
![Silicon-manganese Alloy 6517]( "Silicon-manganese Alloy 6517")
Silicon-manganese Alloy 6517Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicothermic production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirementLearn More →
![Silicon-manganese Alloy 6818]( "Silicon-manganese Alloy 6818")
Silicon-manganese Alloy 6818Introduction to Basic Knowledge of Silicon Manganese Alloy Introduction to Basic Knowledge of Silicon Manganese Alloy 1. Concept: Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield iron alloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicon thermal production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirementLearn More →
![Silicon-manganese Alloy 6014]( "Silicon-manganese Alloy 6014")
Silicon-manganese Alloy 6014Introduction to Silicon Manganese Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicothermic production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirementLearn More →
![Silicon-manganese Alloy]( "Silicon-manganese Alloy")
Silicon-manganese AlloyIntroduction to Silicon Manganese Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicothermic production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirementLearn More →
![Low-carbon Ferromanganese]( "Low-carbon Ferromanganese")
Low-carbon FerromanganeseQuality Assurance
Delivery Time: Fast delivery within 3-7 days.
Samples: Free samples are available.
We offer ferromanganese grades for selection. First order discount, contact us now.
Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements.
Packing: one metric tonne in a big bag, or according to customer's requirementLearn More →
