Products
Navigation
Send Us A Message
Iron Molybdenum 60
Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements.
Packing: one metric tonne in a big bag, or according to customer's requirement
Chemical Content TableProduct Packaging
Introduction to FeMo
FeMo is an iron alloy consisting of molybdenum and iron, generally containing 50-60% molybdenum, and is used as an alloying additive in steelmaking. Ferro Molybdenum is an alloy of molybdenum and iron. Its main use is as a molybdenum additive in steelmaking. Adding molybdenum to steel gives it a uniform fine grain organisation, improves its hardenability, helps eliminate temper brittleness, and alloys with special physical properties. Adding molybdenum to cast iron improves its strength and wear resistance.
Introduction to Ferromolybdenum 60
Ferro Molybdenum is an amorphous metal additive in the production process that has several excellent properties that are transferred to the new alloy. One of the main benefits of ferro-molybdenum alloys is its hardening properties, which make the steel extremely weldable, and ferro-molybdenum is one of the nation's 5 high melting point metals. Additionally, increased alloying to ferromolybdenum improves corrosion resistance. The properties of ferro molybdenum give it an extra layer of protection over other metals for a wide variety of products.
Specification and particle size: natural lump, 10-100mm, powder or according to customer's requirement.
Packing: one metric tonne in a big bag or according to customer's requirement
Application of Ferro Molybdenum 60
The greatest application of Ferro Molybdenum is in the production of ferro alloys depending on the molybdenum content and range, which are used in machine tools and equipment, military equipment, refinery tubing, load bearing parts and rotating manoeuvres. Ferro Molybdenum is also used in cars, trucks, locomotives and ships. In addition, ferro-molybdenum is used in stainless and heat-resistant steels that are employed by synthetic fuels and within chemical plants, heat exchangers, generators, refinery equipment, pumps, turbine tubes, ship propellers, plastics and acids, and storage containers. Tool steels with a high proportion of ferro-molybdenum range are used for high-speed machined parts, cold work tools, drills, screwdrivers, moulds, chisels, heavy castings, balls and mills, rolls, cylinder blocks, piston rings and large drill bits.
Delivery Time
Inventory 2-3 working days New manufacturing 7-10 working days
Mode of Transportation
1. By Air, fast but expensive.
2. By Sea, usual and economy.
3. By Train, suit for middle Asia countries.
4. By Express, suit for small package.
We only provide highest quality goods available, accompanied by after support!
Q1: What international standards do your products and services comply with?
A1: Our products fully comply with international standards such as REACH, MSDS, and COA, and we strictly implement the ISO9001 quality management system. We can also provide third-party testing reports (SGS, BV, etc.) according to customer needs.
Q2: How long does it take for goods to be delivered to my country?
A2: The delivery time depends on the transport mode and destination country. Generally, sea transport takes 15-30 days, air transport takes 3-7 days, and we will optimize the transport route to shorten the delivery time as much as possible.
Can you provide customs clearance services for dangerous chemicals?
A3: Yes. Our team is proficient in the customs clearance procedures for dangerous chemicals in various countries, and can provide professional compliant declaration and customs clearance services to ensure smooth customs clearance.
Q4: Do you provide customized product and service solutions?
A4: Yes. We can provide personalized product customization and export service solutions according to your specific needs (product specifications, application scenarios, procurement volume, etc.).
![Ferrosilicon 75]( "Ferrosilicon 75")
Ferrosilicon 75Ferrosilicon is an iron alloy composed of iron and silicon. Ferrosilicon is an iron silicon alloy made by melting coke, scrap steel, quartz (or silica) as raw materials in an electric furnace. The manufacturer provides four grades of ferrosilicon, 75 # 72 # 70 # 65 #. The price of ferrosilicon is favorable, and the processing granularity includes natural blocks, standard blocks, particles, powders, etc. Can be provided according to customer requirements.Learn More →
![Ferrosilicon 70]( "Ferrosilicon 70")
Ferrosilicon 70Ferro Titanium, an intermediate alloy of titanium and iron, is used as a purifying agent for steel. Production process: Ferro-titanium is an alloy of titanium and iron. The process of producing ferrotitanium usually involves mixing titanium and iron feedstocks and reacting them at high temperatures. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement.Learn More →
![Ferrosilicon 65]( "Ferrosilicon 65")
Ferrosilicon 65Silicon iron 65 has always been one of the metallurgical materials purchased by metallurgical material manufacturers. The price of silicon iron 65 is slightly lower than that of silicon iron 75 72, but the silicon content is much better than that of low silicon iron. The national standard silicon iron content is better, and the effect in the metallurgical process is also more obvious. At the same time, the smelting cost is greatly reduced. Therefore, the national standard silicon iron 65 is very popular among metallurgical manufacturers! Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirement.Learn More →
![Silicon-manganese Alloy 6517]( "Silicon-manganese Alloy 6517")
Silicon-manganese Alloy 6517Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicothermic production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirementLearn More →
![Silicon-manganese Alloy 6818]( "Silicon-manganese Alloy 6818")
Silicon-manganese Alloy 6818Introduction to Basic Knowledge of Silicon Manganese Alloy Introduction to Basic Knowledge of Silicon Manganese Alloy 1. Concept: Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield iron alloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicon thermal production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirementLearn More →
![Silicon-manganese Alloy 6014]( "Silicon-manganese Alloy 6014")
Silicon-manganese Alloy 6014Introduction to Silicon Manganese Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicothermic production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirementLearn More →
![Silicon-manganese Alloy]( "Silicon-manganese Alloy")
Silicon-manganese AlloyIntroduction to Silicon Manganese Silicon manganese alloy is an alloy composed of manganese, silicon, iron, and a small amount of carbon and other elements. It is a widely used and high-yield ferroalloy. Silicon manganese alloy is a commonly used composite deoxidizer in steelmaking, and also a reducing agent for low-carbon manganese iron and electro silicothermic production of metallic manganese in production. Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements. Packing: one metric tonne in a big bag, or according to customer's requirementLearn More →
![Low-carbon Ferromanganese]( "Low-carbon Ferromanganese")
Low-carbon FerromanganeseQuality Assurance
Delivery Time: Fast delivery within 3-7 days.
Samples: Free samples are available.
We offer ferromanganese grades for selection. First order discount, contact us now.
Specification and particle size: natural lump, 10-100mm, powder or customised according to customers' requirements.
Packing: one metric tonne in a big bag, or according to customer's requirementLearn More →
